LaserPly

5 products

We have 5 grades of LaserPly

LaserPlyPREMIER
Very strong product used for hockey sticks, snow boards etc from Finland. Stocked in 0.8mm, 1.0mm and 3.0mm

LaserPlyLITE
Poplar plywood from Italy. Around 30% lighter than normal plywood so ideal for lower-powered lasers. Stocked in 3.0mm, 4.0mm, 6.0mm & 9.00mm. Also stocked with a 2/s Birch veneer.

LaserPlySTANDARD
Birch plywood from Russia B/BB grade. Was the standard material for model-making but unable to source since the invasion of Ukraine. Normally stocked in 3.0mm, 4.0mm, 5.0mm, 6.0mm & 9.0mm.

LaserPlyBUDGET
Birch plywood from Russia. the is a lower grade (BB/BB) so has more knots/repairs the STANDARD. Only recommended where the item will be painted. Unable to source since the war with Ukraine. Normally stocked in 3.0mm, 4.0mm, 5.0mm and 6.0mm.

ExteriorPly
Not actually a LaserPly but we continue to stock it for customers wanting the option of a ply they can use outside. Sourced from Finland and stocked in 0.8mm and 1.5mm.

Showing 1 - 5 of 5 products

In stock

Hobarts LaserPlyLITE – Italian Poplar Plywood Grade B/BB

LaserPlyLITE – Italian Poplar plywood grade B/BB available in 3mm, 4mm, 6mm and 9mm LaserPlyLite...

From £1.04 From £1.25

Cutting This item can be cut using a CO2 laser. You should achive very good results with our materials. If not, your laser settings may need adjusting. Please consult your user manual or the company that you bought your laser from for specific advice

Engraving This item can be engraved using a CO2 laser. Some materials can be engraved using engraving compounds such Cermark but these are not included in this category

Marking This item can be marked using a CO2 laser. It may be possible to mark some materials using HPDFO - High Power Density Focussing Optics but these are not included

Recyclable This item can be recycled

Sustainable This wood product has been sourced from sustainable resources. This material is covered by the Forestry Stewardship Council scheme.

View Product

In stock

Hobarts LaserPlyLITE - Birch face/Italian Poplar core grade B/BB

Please note we have changed our reference for this product from WO.PLYLITEBV to WO.VP.BIRCH. Birc...

From £1.42 From £1.70

Engraving This item can be engraved using a CO2 laser. Some materials can be engraved using engraving compounds such Cermark but these are not included in this category

Marking This item can be marked using a CO2 laser. It may be possible to mark some materials using HPDFO - High Power Density Focussing Optics but these are not included

Recyclable This item can be recycled

Sustainable This wood product has been sourced from sustainable resources. This material is covered by the Forestry Stewardship Council scheme.

View Product

In stock

Hobarts LaserPlyPREMIER - Finnish Birch Plywood grade BR/BR

LaserPlyPREMIER Birch plywood sheet from Finland available in 0.8mm, 1.5mm & 3.0mm This plywo...

From £3.18 From £3.82

Engraving This item can be engraved using a CO2 laser. Some materials can be engraved using engraving compounds such Cermark but these are not included in this category

Marking This item can be marked using a CO2 laser. It may be possible to mark some materials using HPDFO - High Power Density Focussing Optics but these are not included

Recyclable This item can be recycled

Sustainable This wood product has been sourced from sustainable resources. This material is covered by the Forestry Stewardship Council scheme.

View Product

In stock

Hobarts EXTERIOR grade Birch Plywood from Finland

0.8mm & 1.5mm exterior grade Birch plywood sheet from Finland Being a natural product, the co...

From £2.05 From £2.46

Engraving This item can be engraved using a CO2 laser. Some materials can be engraved using engraving compounds such Cermark but these are not included in this category

Marking This item can be marked using a CO2 laser. It may be possible to mark some materials using HPDFO - High Power Density Focussing Optics but these are not included

Recyclable This item can be recycled

Sustainable This wood product has been sourced from sustainable resources. This material is covered by the Forestry Stewardship Council scheme.

View Product

Save £10.12

In stock

Hobarts Pack #6 - Wood pack - 5 assorted sheets size 600x300mm

Assorted MDF pack of 5 sheets size 600x300mm selected from: Laser-grade MDF: 4mm and 6mm ...

£10.12 £12.14 £20.24 £24.29

Engraving This item can be engraved using a CO2 laser. Some materials can be engraved using engraving compounds such Cermark but these are not included in this category

Marking This item can be marked using a CO2 laser. It may be possible to mark some materials using HPDFO - High Power Density Focussing Optics but these are not included

Recyclable This item can be recycled

Sustainable This wood product has been sourced from sustainable resources. This material is covered by the Forestry Stewardship Council scheme.

View Product

Great service!

Order turned up prompt, correct and undamaged. Thank you!

Good!

Great quality & great service !

LaserPlyLITE - Birch face/Italian Poplar core grade B/BB

Excellent Quality that cuts perfectly with a laser

Bought to make wedding toppers for as a trial. The customer loved them and is planning on ordering them for the weddings she organises.
Cuts easily leaving a flame clean polished cut.

Great material

Really good quality material that really looks the part! I've purchased Glowforge materials before that simply don't emulate premium non MDF materials well at all but this really ticks the boxes, I will be purchasing more in the future!

Recover password

Create my account

This Months' Special Offers

LaserPly

Let customers speak for us

Spring Sale

This Months' Special Offers

Let customers speak for us